Detailed Explanation of Machining Equipment and Process Knowledge
Release date:
2022-07-22
01 Machining Equipment 1. Conventional Lathe: The machining lathe is primarily used to process shafts, discs, sleeves, and other workpieces with rotating surfaces. It is a widely applied machine tool in mechanical manufacturing, capable of achieving precision as high as 0.01 millimeters.
01 Machining Equipment

1. Ordinary Lathe: The machining lathe is primarily used to process shafts, discs, sleeves, and other workpieces with rotating surfaces. It is a widely applied machine tool in mechanical manufacturing, capable of achieving precision as high as 0.01 millimeters.
2. Conventional milling machine: Capable of machining flat surfaces, grooves, various shapes, gears, and more—suitable for processing relatively complex contours. (Accuracy can reach 0.05 mm.)
3. Grinding Machines: A grinding machine is a device used to refine the surface of workpieces. Most grinding machines employ high-speed rotating abrasive wheels for grinding, while others utilize alternative abrasives such as oilstones, belts, or even glass-based abrasives for precision finishing (e.g., ultra-precision grinders, belt-grinding machines, lapping machines, and honing machines). These machines can achieve machining accuracies as fine as 0.005 mm, with smaller components capable of reaching up to 0.002 mm.
4. Jigs and Fixtures: The operations involving jigs and fixtures primarily include: pile driving, sawing, scribing, drilling, hinging, tapping and threading, scraping, grinding, straightening, bending, and riveting, among others.
5. CNC lathes: Primarily used for machining mass-produced products and high-precision parts, among others. (Accuracy can reach 0.01 millimeters.)
6. CNC milling machines: Primarily used for processing mass-produced items, high-precision parts, complex components, and large workpieces. (Accuracy can reach 0.01 millimeters.)
7. Wire Cutting: In slow-motion processes, the electrode used is brass wire, while the medium-speed electrode is molybdenum wire. This method allows for highly precise silk-like machining with excellent surface finish. The processed parts exhibit meticulous craftsmanship, including those from Jeongjo and other refined works. (Slow-speed wire cutting can achieve an accuracy of up to 0.003 mm, whereas medium-speed wire cutting delivers accuracy as fine as 0.02 mm.)
8. Spark Machine: Spark machining refers to a process that cuts through materials and complex-shaped workpieces—such as mold cavities, corners, holes, irregularly shaped holes, or cemented carbide components—that are difficult to machine using conventional cutting methods. This technique generates no cutting force, eliminating defects like burrs and tool marks. It is unaffected by material hardness or heat treatment conditions, achieving precision as fine as 0.005 millimeters.
02 Machining Process
The process specification is one of the technical documents that outlines the manufacturing processes and operational methods for parts and components. Under specific production conditions, a reasonably optimized process flow and set of operating procedures are documented in a standardized format to guide actual production activities.
The cutting process of the part consists of multiple operations, each of which can be further divided into several setups, workstations, sequences, and paths.
The processes required in manufacturing depend on the structural complexity of the machined part, the precision requirements for machining, and the type of production.
Depending on the production volume, the processing techniques also vary.
Machining Process Knowledge
1) Precision milling operations below 0.05 cannot be performed and require CNC machining. If the hole is a through-hole, wire cutting is still possible.
2) After quenching, micro-holes (through-holes) require wire cutting. Blind holes need rough machining before quenching and fine finishing after quenching. Non-civil servants can position themselves before quenching begins.
3) Slots narrower than 2 mm require wire cutting, and slots with a depth of 3–4 mm—especially those that are deep—are also suitable for wire cutting.
4) The minimum remaining amount for fluorination rough machining is 0.4, while for non-fluorination rough machining, it is at least 0.2.
5) The coating thickness typically ranges from 0.005 to 0.008, and during processing, it should match the dimensions specified before plating.
Process Time for Machining Part 03
Time quotas are the amount of time required to complete a work process—they serve as an indicator of labor productivity. Based on time quotas, one can plan production schedules, conduct cost calculations, determine equipment and staffing requirements, and even allocate production space. Therefore, time quotas are a crucial component of any manufacturing process.
The determination of time quotas should be based on the production and technical conditions of Chinese enterprises, ensuring that most workers can achieve them through effort, while some advanced workers may even surpass them, and a small number of workers, with dedicated effort, could reach or approach the average advanced level.
As enterprises continuously improve their production technology, time quotas are regularly revised to maintain an average of advanced standards.
The standard time is typically determined by technicians and workers who, combining their past experience and referring to relevant technical documentation, directly estimate and finalize it. Alternatively, it can be estimated by comparing and analyzing the standard times of similar products or processes, or by measuring and analyzing actual operation times.
Related News
Want more detailed product information?
Leave us a message to inquire.
TONGREN IND.AND TRADING CO., LIMITED
Phone: 0086-513-83571237
Mobile phone: 0086-13814629071
Email: trgm5f@tr-casting.com
Address: Liuqiao Street, Liuqiao Town, Tongzhou District, Nantong City, China.